生产工艺流程

Production Process

寻焊缝定位、圆罐成方、下翻边、封底、倒罐、上翻边、封盖

Locating、Expanding、Bottom flanging、Bottm seaming、Turn over、Top flanging、Top seaming

设备简介

Product Introduction

YHZD-60S小方罐罐身生产线是新宜公司倾力打造的一条小方罐罐身生产设备，是在参照欧洲同类型机器的基础上进行创新。完全拥有自主知识产权。该生产线设计极速是每分钟80罐的生产速度，正常稳定是60罐／分钟的生产速度。采用双模、寻焊线定位、双模胀方成型、单模单头翻边、封罐。罐身同步翻转，再到单模单头的翻边封罐，完成一个小方罐的罐身生产。

This production line is established by SHINYI with enormous effect,referring to the similar production line from Europe.This productionline owns the independent intellectual property rights. The top speed of YHZD-60S production line can reach 80 cans/min,and 60cans/min under the stable working conditions.lt adopts advanced techniques such as dual moulds locator,dual moulds expanding,single mould single head bottom flanging and seaming, can body turns   over,single mould single head top flanging and seaming.Then the can body is finished.

主要技术参数

Main Technical Parameters

适应罐型：1-5L方罐 异形罐（需换模具）

使用电压：三相四线380V（可以根据不同国家配置）

生产速度：60罐／分钟

整线功率：45KW

适应罐高：80-350mm

整线重量：约13吨

使用气压：不低于0.6Mpa

整线规格：长7830×宽1700×高2450mm

连接高度：1000±10mm

Applicable cans:1L-5L square cans and irregular cans(need to change moulds)

Output:60 CPM

Voltage:three-phase four-line 380V(can be configured according to different countries)

Power of whole line:45KW

Applicable can height:80mm-350mm

Weight of whole line:App.13T

Air pressure:Not lower than 0.6 MPA

Dimension of whole line:L7830×W1700×H2450mm

Connection height:1000±10mm