生产工艺流程

Production Process

寻焊缝定位、圆罐成方、上翻边、下翻边、封底、倒罐、封盖

Locating、Expanding、Top flanging、Bottom flanging、Bottm seaming、Turn over、Top seaming

设备简介

Product Introduction

此生产线采用纯机械式凸轮传动、凸轮送罐、凸轮抱罐。速度连续可调，配置有卡罐保护装置，令生产过程安全流畅。专利设计的胀方工位复位槽，令胀方工序更久耐用，克服了使用弹簧的弹簧疲劳问题。内外槽轮式翻边工序，令翻边工序均匀，快速同时保证了罐身的卷封质量。

The line adopts purely mechanial cam transmission,cam conveying can,cam holdind can.It runs smoothly and safely because of continuously adjustable speed and protection device of can jam. Design of reset groove for expanding square process is in order to avoid the fatigue life of the spring and make this work station more durable.The internaland external grooved pulley design makes sure the flanging is uniform and fast,so that to ensure good seaming quality.

主要技术参数

Main Technical Parameters

适应罐型：1-5L方罐（需换模具）

生产速度：30罐／分钟

适应罐高：80-350mm

使用气压：不低于0.6Mpa

链接高度：1000±10mm

整线功率：25KW

使用电压：三相四线380V（可以根据不同国家配置）

整线规格：长13100×宽1900×高2400mm

整线重量：约10吨

Applicable cans:1-5L square cans (need to change moulds)

Output:30 CPM

Applicable can height:80-350mm

Air pressure:Not lower than 0.6 MPA

Connection height:1000±10mm

Voltage:three-phase four-line 380V(can be configured according to different countries)

Dimension of whole line:L13100xW1900xH2400mm

Weight of whole line:App.10T

Power of whole line:25KW